my last attempt to do a blog on big project didn’t really work. This time, I will be less ambitious. I will let you know how it’s going rather than a step by step. I will also share anything new I learn and any tips I get from other warmongers.
I started on the legs and I cleaned up all the legs parts. One lower leg section was miscast so fw sent me a replacement. The rest of the legs were ok. After smoothing them over, I washed them. Someone had suggested using fairy power spray befor the traditional soak. This has worked wonders and you can feel difference. It’s great to be working with such massive parts again, but it does throw up challenges.
I was pleased with the results and now on to sub assembly. I pinned the 2 hip parts using 2mm brass rod as a lot weight goes through the joins. For glue, I am moving away from super glue for the big joins, and using a 2 part epoxy resin. This will take longer to cure, but will form a much stronger bond. I have tried a few test pieces and the bond is incredible! I used jb cold weld. It is very strong! Cost was around £5 from Amazon.
The upper legs are set in slight stride to help balance and I wanted a more shooting pose so less leg action is better.
On a quick I have found that my twin long ranged option is called ‘goth’ pattern, and it suits my idea very to have a cool name for the pattern.
A big part of the legs are all the Pistons, and these will go on last. Everyone says this a nightmare, so not looking forward to this. Thankfully, none of the legs are magnatized, so that’s one task I don’t need to worry about. But there are a lot of them, the toe, ankle, knee, and hips all have Pistons. They need to be trimmed to fit the pose once the legs are set.
I have made a start on the feet. Cleaning and prepping them. The 8 toes are all Sorted and I have done the toe Pistons. The process was difficult. As the leg position move the feet position, each piston is cut to length. I did these 1 at a time, gluing them into to, but not the ankle armour. This means each toe can be painted separately. The toes are all different. You get 4 ‘side’ toes, then a front left, front right, rear left, rear right. The ankle armour above the toes is also different, front, rear, inside and out. The larger leg Pistons on the to of the armour plates all move and are easy to position. This is areal godsend! Again the ankle armour is not yet attached for paintings. The hip and knee Pistons are easy to set, the hip ones needing more work.
The leg painting schedule looks a lot of work, but actually should be easy.
Parts list for painting-legs
4 external leg armour plates
8 ankle plates
8 toes (inc 16 Pistons)
The air brush will get through the these in a hurry, but the trim will be a pain. I want old look to the trim, so I will use a brass base, shaded with both nuln oil and earth shade. The new retributor gold and finish with necron compound. The test peice works really well. The metal areas will also get a antique looks, dry brushed necron compound over a black base, washed in earthshade and re dry brushed, then sepia wash and dry brushed. This gives an nice old metal look, that isn’t rusty.